2019
M. Ataei, V. Shaayegan, C. Wang, F. Costa, S. Han, Chul B Park, M. Bussmann, “Numerical analysis of the effect of the local variation of viscosity on bubble growth and deformation in polymer foaming,” Journal of Rheology 63, 895-903, 2019.
C. Wang, V., M. Ataei, F. Costa, S. Han, M. Bussmann, Chul B Park, “Accurate theoretical modeling of cell growth by comparing with visualized data in high-pressure foam injection molding,” European Polymer Journal 119, 189-199, 2019.
M. Ataei, V. Shaayegan, F. Costa, S. Han, Chul B Park, M. Bussmann, “Simulation of Polymer Foaming using the Lattice Boltzmann Method,” arXiv preprint arXiv:1908.04262, 2019.
A. O’Brien, M. Bussmann, “Pore-scale direct numerical simulation of Haines jumps in a porous media model,” arXiv preprint arXiv:1905.07523, 2019.
T. J. Didiano, L. Wilkinson, J. Turner, M. Franklin, J. H. Anderson, M. Bussmann, D. Reeve, J. Audet, “I Have a Ph. D.! Now What? A Program to Prepare Engineering Ph. D.’s and Postdoctoral Fellows for Diverse Career Options,”American Society for Engineering Education, 2019.
2018
G. Mohanan, H. Tran, M. Bussmann, R. Manning, “Effect of ring formation on burner flame stability in lime kilns,” TAPPI JOURNAL 17, 285-293, 2018.
A. O’Brien, M. Bussmann, “A volume-of-fluid ghost-cell immersed boundary method for multiphase flows with contact line dynamics,” Computers & Fluids 165, 43-53, 2018.
A. Asgarian, C. Wu, D. Li, M. Bussmann, K. Chattopadhyay, S. Lemieux, B. Girard, F. Lavallee, V. Paserin, “Experimental and Computational Analysis of a Water Spray; Application to Molten Metal Atomization,”in Advances in Powder Metallurgy & Particulate Materials, 2018.
E. Jin, M. Bussmann, H. Tran, A. Jones, “The Effect of Smelt Composition On Smelt Droplet-Water Iteraction In The Kraft Recovery Boiler Dissolving Tank,” J-FOR-JOURNAL OF SCIENCE & TECHNOLOGY FOR FOREST PRODUCTS AND PROCESSES 7, 38-44, 2018.
S. You, M. Bussmann, H. Tran, D. Tandra, “Modelling Deposit Breakup Under Sootblower Jet Impingement,” J-FOR-JOURNAL OF SCIENCE & TECHNOLOGY FOR FOREST PRODUCTS AND PROCESSES 7, 11-16, 2018.
B. Wang, M. Bussmann, H. Tran, W. Wong, “A field Study on the use of sootblower acoustics to monitor recovery boiler fouling,” J-FOR-JOURNAL OF SCIENCE & TECHNOLOGY FOR FOREST PRODUCTS AND PROCESSES 7, 39-43, 2018.
P. A. Isaza, M. Bussmann, “Effectiveness-NTU Relationships of Parallel-Plate Moving Bed Heat Exchangers,” CSM-SCGM, 2018.
S. Mehrabian, E. Acosta, M. Bussmann, “Oil-particle separation in a falling sphere configuration: Effect of viscosity ratio & interfacial tension,” International Journal of Multiphase Flow 98, 120-127, 2018.
2017
P. A. Isaza, A. O’Brien, W. D. Warnica, M. Bussmann, “Assessing axial heat conduction in moving bed heat exchangers,” International Journal of Thermal Sciences 120, 303-313, 2017.
A. Farrokhpanah, J. Mostaghimi, M. Bussmann, “New smoothed particle hydrodynamics (SPH) formulation for modeling heat conduction with solidification and melting,” Numerical Heat Transfer, Part B: Fundamentals 71, 299-312, 2017.
A. Farrokhpanah, J. Mostaghimi, M. Bussmann, “Free-Surface Enthalpy Method for Transient Convection/Diffusion Phase Change,” arXiv preprint arXiv:1701.00463, 2017.
2016
S. Mehrabian, E. Acosta, M. Bussmann, “Oil–Particle Separation in a Falling Sphere Configuration: Effect of Oil Film Thickness,” Energy Fuels 30, 10, 8776-8786, 2016.
H. Lepage, W. Wong, M. Bussmann, H. Tran, “Acoustic analysis of recovery boiler dissolving tank operation and smelt shattering efficiency,” Tappi Journal 15, 591-596 , 2016.
S.A. Argyropoulos, Z. Li, M. Bussmann, D. Doutre and M. Sukhram, “Aluminum scrap melting under different liquid Al flow conditions, Part II: Two phase flow,” in press, Canadian Metallurgical Quarterly.
S.A. Argyropoulos, Z. Li, M. Bussmann, D. Doutre and M. Sukhram, “Aluminum scrap melting under different liquid Al flow conditions, Part II: Two phase flow,” in press, Canadian Metallurgical Quarterly.
S.A. Argyropoulos, Z. Li, M. Sukhram, M. Bussmann and D. Doutre, ” Aluminum scrap melting under different liquid Al flow conditions, Part I: Single phase flow,” in press, Canadian Metallurgical Quarterly.
M. Seyed Ahmadi, M. Bussmann and S.A. Argyropoulos, “Mass transfer correlations for dissolution of cylindrical additions in liquid metals with gas agitation,” International Journal of Heat and Mass Transfer 97, 767-778, 2016.
H. Lepage, W. Wong, M. Bussmann and H.N. Tran, “Acoustic analysis of recovery boiler dissolving tank operation and smelt shattering efficiency,” TAPPI Journal, in press.
P. Isaza, Y. Cai, W.D. Warnica and M. Bussmann, “Co-current and counter-current vertical pipe moving bed heat exchangers: Analytical solutions,” International Journal of Heat and Mass Transfer 95, 1115-1128, 2016.
A. O’Brien* and M. Bussmann, “Imposing Contact Angle Boundary Conditions on Ghost-Cell Immersed Boundaries,” 24th Annual Conference of the CFD Society of Canada, Kelowna, BC, June 26-29, 2016.
2015
M. Bussmann, E. Jin, M. Lin, A.K. Jones and H.N. Tran, “Experiments on smelt shattering and dissolution,” J-FOR+ Journal of Science & Technology for Forest Products and Processes 4(6), 6-13, 2015.
S. Quraishi, M. Bussmann and E.J. Acosta, “Capillary curves for ex-situ washing of oil-coated particles,” Journal of Surfactants and Detergents 18(5) 811-823, 2015.
S. Mehrabian, M. Bussmann and E.J. Acosta, “Breakup of high solid volume fraction oil-particle cluster in simple shear flow,” Colloids and Surfaces A: Physicochemical and Engineering Aspects 483, 25-35, 2015.
M. Movassat, N. Ashgriz and M. Bussmann, “Oscillation and breakup of a bubble under forced vibration,” International Journal of Heat and Fluid Flow 54, 211-219, 2015.
S. Doroudi, A. Pophali, M. Bussmann, H.N. Tran and D.S. Tandra, “Modelling sootblower jet effectiveness with ANSYS Fluent,” J-FOR+ Journal of Science & Technology for Forest Products and Processes 4(4), 30-35, 2015.
E. Jin, M. Bussmann and H.N. Tran, “An experimental study of smelt-water interaction in the recovery boiler dissolving tank,” TAPPI Journal 14(6), 385-393, 2015.
P. Isaza, W.D. Warnica and M. Bussmann, “Counter-current parallel-plate moving bed heat exchanger: An analytical solution,” International Journal of Heat and Mass Transfer 87, 625-635, 2015.
P. Isaza, W.D. Warnica and M. Bussmann, “Co-current parallel-plate moving bed heat exchanger: An analytical solution,” International Journal of Heat and Mass Transfer 87, 616-624, 2015.
M. Seyed Ahmadi, S.A. Argyropoulos, M. Bussmann and D. Doutre, ” Comparative studies of silicon dissolution in molten aluminum under different flow conditions, Part II: Two-phase flow,” Metallurgical and Materials Transactions B 46(3), 1290-1301, 2015.
M. Seyed Ahmadi, S.A. Argyropoulos, M. Bussmann and D. Doutre, “Comparative studies of silicon dissolution in molten aluminum under different flow conditions, Part I: Single-phase flow,” Metallurgical and Materials Transactions B 46(3), 1275-1289, 2015.
D.S. Tandra, M. Bussmann, A. Kaliazine and H.N. Tran, “A review of University of Toronto research on deposit removal in recovery boilers,” 2015 TAPPI PEERS, Atlanta, GA, October 25-28, 2015.
H. Lepage, W. Wong, M. Bussmann and H.N. Tran, “Acoustic analysis of recovery boiler dissolving tank operation and smelt shattering efficiency,” 2015 TAPPI PEERS, Atlanta, GA, October 25-28, 2015.
2014
J.E. Chen, B. Nurbakhsh, G. Layton, M. Bussmann and A. Kishen, “Irrigation dynamics associated with positive pressure, apical negative pressure and passive ultrasonic irrigations: A computational fluid dynamics analysis,” Australian Endodontic Journal 40(2), 54-60, 2014.
A. Pophali, M. Bussmann and H.N. Tran, “Supersonic jet impingement on a cylinder and characterization of the resulting deflected jets,” Journal of Fluids Engineering 136(11), 111103 1-11, 2014.
A. Taranenko, M. Bussmann and H.N. Tran, “A laboratory study of recovery boiler smelt shattering,” TAPPI Journal 13(8), 27-34, 2014.
P. Isaza, W.D. Warnica and M. Bussmann, “Thermal performance and sizing of moving bed heat exchangers,” ASME IMECE 2014, Montreal, QC, November 14-20, 2014. PDF
S. Mehrabian, N. Abbas-Pour, M. Bussmann and E.J. Acosta, “The effect of viscosity ratio on the hydrodynamics of separation from an oil-coated particle,” ASME 2014 4th Joint US-European Fluids Engineering Division Summer Meeting, Chicago, IL, August 3-7, 2014. PDF
S. Doroudi, A. Pophali, M. Bussmann, H.N. Tran and D.S. Tandra, “Modelling sootblower jet effectiveness with ANSYS Fluent,” International Chemical Recovery Conference, Tampere, Finland, June 8-13, 2014. Awarded Best Recovery Boiler Paper. PDF
M. Bussmann, E. Jin, M. Lin, A.K. Jones and H.N. Tran, “Experiments on smelt shattering and dissolution,” International Chemical Recovery Conference, Tampere, Finland, June 8-13, 2014. PDF
S. Doroudi, M. Bussmann, D.S. Tandra and H.N. Tran, “ANSYS Fluent for modeling sootblower jets,” 22nd Annual Conference of the CFD Society of Canada, Toronto, ON, June 1-4, 2014. PDF
P. Isaza, W.D. Warnica and M. Bussmann, “Volume averaging towards a one-equation model for a moving bed heat exchanger,” 22nd Annual Conference of the CFD Society of Canada, Toronto, ON, June 1-4, 2014. PDF
E. Jin, M. Bussmann and H.N. Tran, “The interaction of molten smelt and water,” CSME International Congress, Toronto, ON, June 1-4, 2014. PDF
M. Lin, M. Bussmann and H.N. Tran, “Characterizing smelt shattering performance in a recovery boiler,” CSME International Congress, Toronto, ON, June 1-4, 2014. PDF
H. Lepage, W. Wong, H.N. Tran and M. Bussmann, “Passive acoustic monitoring of recovery boiler dissolving tank operation,” CSME International Congress, Toronto, ON, June 1-4, 2014. PDF
2013
M. Bussmann, B. Emami, D. Tandra, W.Y. Lee, A. Pophali and H.N. Tran, “Modeling of sootblower jets and the impact on deposit removal in industrial boilers, Energy & Fuels 27(10), 5733-5737, 2013.
A. Pophali, B. Emami, M. Bussmann and H.N. Tran, “Studies on sootblower jet dynamics and ash deposit removal in industrial boilers,” Fuel Processing Technology 105, 69-76, 2013.
E.S.-C. Fan and M. Bussmann, “Piecewise linear volume tracking in spherical coordinates,” Applied Mathematical Modelling 37(5), 3077-3092, 2013.
A. Taranenko, M. Bussmann and H.N. Tran, “A laboratory study of recovery boiler smelt shattering,” 2013 TAPPI PEERS, Green Bay, WI, September 15-18, 2013. PDF
E. Jin, M. Bussmann and H.N. Tran, “An experimental study of smelt-water interaction in the recovery boiler dissolving tank,” 2013 TAPPI PEERS, Green Bay, WI, September 15-18, 2013. PDF
2012
H.N. Tran, A. Pophali, M. Bussmann and P. Miikkulainen, “Measurements of sootblower jet strength in kraft recovery boilers – Part II: Results of the 3rd and 4th field trials,” TAPPI Journal 11(9), 31-35, 2012.
H. Montazeri, M. Bussmann and J. Mostaghimi, “Accurate implementation of forcing terms for two-phase flows into SIMPLE algorithm,” International Journal of Multiphase Flow 45, 40-52, 2012.
B. Emami, M. Bussmann and H.N. Tran, “A semianalytical solution for a compressible turbulent axisymmetric jet,” SIAM Journal on Applied Mathematics 72(1), 85-98, 2012.
M. Movassat, N. Ashgriz and M. Bussmann, “Chaotic shape and translational dynamics of 2D incompressible bubbles under forced vibration in microgravity,” Microgravity Science and Technology 24, 39-51, 2012.
D.S. Tandra, H.N. Tran, M. Bussmann, and A.K. Jones, ” Low pressure sootblowing technology: The state of development,” 2012 TAPPI PEERS, Savannah, GA, October 14-17, 2012. PDF
A. Pophali, M. Bussmann, H.N. Tran and A.K. Jones, “Flow visualization of the interaction between a sootblower jet and heat transfer tubes in kraft recovery boilers,” 2012 TAPPI PEERS, Savannah, GA, October 14-17, 2012. PDF
M. Bussmann, B. Emami, D. Tandra, W.Y. Lee, A. Pophali, H.N. Tran, “Modeling of sootblower jets and the impact on deposit removal in industrial boilers,” Impacts of Fuel Quality on Power Production and the Environment, Puchberg, Austria, September 23-27, 2012. PDF
P.A. Ferdowsi and M. Bussmann, “Axisymmetric drop penetration into an open straight capillary,” 20th Annual Conference of the CFD Society of Canada, Canmore, AB, May 9-11, 2012. PDF
A. Asgarian, M. Bussmann and C.B. Park, “Comparison of the mixing performance of two cooling screw extruders,” 20th Annual Conference of the CFD Society of Canada, Canmore, AB, May 9-11, 2012. PDF
2011
B. Emami, M. Bussmann, and H.N. Tran, “Computational study of a supersonic free jet rotating perpendicular to the streamwise direction,” International Journal of Computational Fluid Dynamics 25(6), 319-332, 2011.
E.S.-C. Fan, M. Bussmann and E.J. Acosta, “Equilibrium configurations of drops attached to spheres in a uniform laminar flow,” The Canadian Journal of Chemical Engineering 89(4), 707-716, 2011.
M. Movassat, N. Ashgriz and M. Bussmann, “Bubble dynamics, oscillation, and breakup under forced vibration in microgravity,” 62nd International Astronautical Congress 2011, Cape Town, South Africa, October 3-7, 2011, 553-561. PDF
M. Seyed Ahmadi, S.A. Argyropoulos, M. Bussmann and D. Doutre, “Dissolution studies of Si metal in liquid Al with gas injection,” COM (Conference of Metallurgists) 2011, Montreal, QC, October 3-5, 2011. PDF
B. Emami, M. Bussmann and H.N. Tran, “Effect of lance pressure on sootblower jet characteristics,” 2011 TAPPI PEERS, Portland, OR, October 2-5, 2011, 866-893. Awarded 2011 Steam and Power Best Paper Award by the Engineering Division of TAPPI. PDF
H.N. Tran, A. Pophali, M. Bussmann and P. Miikkulainen, “Measurements of sootblower jet strength in kraft recovery boilers – Part II: Results of the 3rd and 4th field trials,” 2011 TAPPI PEERS, Portland, OR, October 2-5, 2011, 843-865. PDF
M. Seyed Ahmadi, S.A. Argyropoulos, M. Bussmann and D. Doutre, Dissolution studies of Si metal in liquid Al under different forced convection conditions, 2011 TMS Light Metals, San Diego, CA, February 27 – March 3, 2011, 809-814. PDF
2010
C. Wang, S.N. Leung, M. Bussmann, W.T. Zhai and C.B. Park, “Numerical investigation of nucleating agent-enhanced heterogeneous nucleation,” Industrial & Engineering Chemistry Research 49(24), 12783-12792, 2010.
M. Raessi, J. Mostaghimi and M. Bussmann, “A volume-of-fluid interfacial flow solver with advected normals,” Computers & Fluids 39(8), 1401-1410, 2010.
B. Emami, M. Bussmann and H.N. Tran, “Application of realizability and shock unsteadiness to k-ε simulations of under-expanded axisymmetric supersonic free jets,” Journal of Fluids Engineering 132, 041104-1-7, 2010.
C.L. Wang, M. Bussmann and C.B. Park, “Numerical investigation of the effect of screw geometry on the mixing of a viscous polymer melt,” Journal of Applied Polymer Science 117(2), 775-784, 2010.
H. Liu, F. Azarmi, M. Bussmann, J. Mostaghimi and T.W. Coyle, “Experiments and simulation of rapid solidication of air plasma sprayed alloy 625 on stainless steel,” Surface & Coatings Technology 204, 1521-1527, 2010.
A. Pophali, B. Emami, M. Bussmann, and H.N. Tran, “Studies on sootblower jet dynamics and ash deposit removal in industrial boilers,” Impacts of Fuel Quality on Power Production and the Environment, Saariselkä, Finland, August 29 – September 3, 2010. PDF
P. Ferdowsi and M. Bussmann, “Method of least squares for computing normals and curvatures from 2D volume fractions” (poster), XVIII International Conference on Computational Methods in Water Resources, CMWR 2010, Barcelona, Spain, June 21-24, 2010, 1136-1137. PDF
P. Ferdowsi and M. Bussmann, “Numerical treatment of contact line motion near a sharp corner,” 5th European Conference on Computational Fluid Dynamics, ECCOMAS CFD 2010, Lisbon, Portugal, June 14-17, 2010. PDF
C.L. Wang, S.N. Leung, M. Bussmann and C.B. Park.”Local pressure fluctuation around a cavity surface of a heterogeneous nucleation site,” ANTEC 2010, Orlando, FL, May 16-20, 2010, 3, 2234-2240. PDF
C.L. Wang, M. Bussmann and C.B. Park, “How do multiple flights improve the effectiveness of a cooling extruder screw?,” ANTEC 2010, Orlando, FL, May 16-20, 2010, 3, 2063-2069. PDF
B. Emami, M. Bussmann, H.N. Tran and D. Tandra, “Advanced CFD simulations of sootblower jets,” International Chemical Recovery Conference, Williamsburg, VA, March 29 – April 1, 2010, 2, 207-215. PDF
A. Pophali, M. Bussmann and H.N. Tran, “Visualizing the interactions between a sootblower jet and a superheater platen,” International Chemical Recovery Conference, Williamsburg, VA, March 29 – April 1, 2010, 2, 196-206. PDF
2009
A. Pophali, M. Eslamian, A. Kaliazine, M. Bussmann and H.N. Tran, “Breakup mechanisms of brittle deposits in kraft recovery boilers,” TAPPI Journal 8(9), 4-9, 2009.
T.C.-M. Wu, M. Bussmann and J. Mostaghimi, “The impact of a partially molten YSZ particle,” Journal of Thermal Spray Technology 18(5-6), 957-964, 2009.
H. Liu, H.R. Salimi Jazi, M. Bussmann and J. Mostaghimi, “Experiments and modeling of rapid solidification of plasma-sprayed yttria-stabilized zirconia,” Acta Materialia 57(20), 6013-6021, 2009.
S. Afkhami and M. Bussmann, “Height functions for applying contact angles to 3D VOF simulations,” International Journal for Numerical Methods in Fluids 61(8), 827-847, 2009.
B. Emami, M. Bussmann, and H.N. Tran, “A mean flow field solution to a moderately under/over- expanded turbulent supersonic jet,” Comptes Rendus Mécanique 337(4), 185-191, 2009.
S. Afkhami, S. Zaleski and M. Bussmann, “A mesh-dependent model for applying dynamic contact angles to VOF simulations,”Journal of Computational Physics 228(15), 5370-5389, 2009.
M. Raessi, M. Bussmann and J. Mostaghimi, “A semi-implicit finite volume implementation of the CSF method for treating surface tension in interfacial flows,” International Journal for Numerical Methods in Fluids 59(10), 1093-1110, 2009.
H. Liu, M. Bussmann and J. Mostaghimi, “A comparison of hyperbolic and parabolic models of phase change of a pure metal,” International Journal of Heat and Mass Transfer 52(5-6), 1177-1184, 2009.
M. Eslamian, A. Pophali, M. Bussmann and H.N. Tran, “Breakup of brittle deposits by supersonic air jet: The effects of varying jet and deposit characteristics,” International Journal of Impact Engineering 36(2), 199-209, 2009.
M. Movassat, N. Ashgriz and M. Bussmann, “Bubble dynamics under forced oscillation in microgravity environment,” ASME IMECE 2009, Lake Buena Vista, FL, November 13-19, 2009, 9C, 1787-1793. PDF
C.L. Wang, S.N. Leung, C.B. Park and M. Bussmann, “Numerical simulation of pressure distribution around a heterogeneous nucleation site,” ANTEC 2009, Chicago, IL, June 22-26, 2009, 3, 1403-1409. PDF
C.L. Wang, M. Bussmann and C.B. Park, “Finite element modeling of the pressure profile around a particle acting as a heterogeneous nucleation site,” 17th Annual Conference of the CFD Society of Canada, Ottawa, ON, May 3-5, 2009. PDF
B. Emami, M. Bussmann and H.N. Tran, “Simulation of the quasi-steady behavior of under-expanded supersonic jets due to instability waves,” 17th Annual Conference of the CFD Society of Canada, Ottawa, ON, May 3-5, 2009. PDF
2008
H. Liu, M. Bussmann and J. Mostaghimi, “The effect of undercooling on solidification of YSZ splats,” Journal of Thermal Spray Technology 17(5-6), 646-654, 2008.
P. Ferdowsi and M. Bussmann, “Second-order accurate normals from height functions,” Journal of Computational Physics 227(22), 9293-9302, 2008.
S. Afkhami and M. Bussmann, “Height functions for applying contact angles to 2D VOF simulations,” International Journal for Numerical Methods in Fluids 57(4), 453-472, 2008.
M. Eslamian, A. Pophali, M. Bussmann, D.E. Cormack and H.N. Tran, “Failure of cylindrical brittle deposits impacted by a supersonic air jet,” Journal of Engineering Materials and Technology 130(3), 031002(7), 2008.
A. Pophali, M. Eslamian, A. Kaliazine, M. Bussmann and H.N. Tran, “Breakup mechanisms of brittle deposits in kraft recovery boilers – A fundamental study,” TAPPI 2008 Engineering, Pulping, and Environmental Conference, Portland, OR, August 24-27, 2008, 2, 1005-1034. PDF
C.L. Wang, M. Bussmann and C.B. Park, “Numerical investigation of the effect of flow geometry on mixing a viscous polymer melt,” 16th Annual Conference of the CFD Society of Canada, Saskatoon, SK, June 9-11, 2008. PDF
B. Emami, M. Bussmann and H.N. Tran, “Turbulence/shock wave interaction in simulation of underexpanded supersonic jets,” 16th Annual Conference of the CFD Society of Canada, Saskatoon, SK, June 9-11, 2008. PDF
H. Liu, M. Bussmann and J. Mostaghimi, “The effect of undercooling on solidification of YSZ splats,” International Thermal Spray Conference 2008, Maastricht, The Netherlands, June 2-4, 2008.
C.L. Wang, M. Bussmann and C.B. Park, “Numerical investigation of effect of screw geometry on mixing in a cooling extruder,” ANTEC 2008, Milwaukee, WI, May 4-8, 2008, 1, 327-331.
2007
M. Malik, E.S.-C. Fan and M. Bussmann, “Adaptive VOF with curvature-based refinement,” International Journal for Numerical Methods in Fluids 55(7), 693-712, 2007.
M. Raessi, J. Mostaghimi and M. Bussmann, “Advecting normal vectors: A novel approach to calculating interface normals and curvatures when modeling two-phase flows,” Journal of Computational Physics 226(1), 774-797, 2007.
B.Y. Choi and M. Bussmann, “A piecewise linear approach to volume tracking a triple point,” International Journal for Numerical Methods in Fluids 53(6), 1005-1018, 2007.
M. Raessi, M. Bussmann and J. Mostaghimi, “An implicit implementation of surface tension in finite volume models for two-phase flows,” 20th ILASS-Americas Conference, Chicago, IL, May 15-18, 2007. 2007-ILASS-RaessiBussmannMostaghimi
C.L. Wang, M. Bussmann and C.B. Park, “Mathematical model and numerical analysis of polymer melt flow and heat transfer in a cooling extruder,” ANTEC 2007, Cincinnati, OH, May 6-10, 2007, 453-457. PDF
2006
I. Barbulovic-Nad, M. Lucente, Y. Sun, M. Zhang, A.R. Wheeler and M. Bussmann, “Bio-microarray fabrication techniques – A review,” Critical Reviews in Biotechnology 26(4), 237-259, 2006.
M. Raessi, J. Mostaghimi and M. Bussmann, “Effect of surface roughness on splat shapes in the plasma spray coating process,” Thin Solid Films 506-507, 133-135, 2006.
M. Bussmann and F. Ahmed, “Numerical predictions of the stability of a melt spinning puddle,” 14th Annual Conference of the CFD Society of Canada, Kingston, ON, July 16-18, 2006. PDF
S. Afkhami and M. Bussmann, “Drop impact simulation with a velocity-dependent contact angle,” 19th ILASS-Americas Conference, Toronto, ON, May 23-26, 2006. PDF
M. Raessi, J. Mostaghimi and M. Bussmann, “A new method for calculating interface normal vectors and curvatures when modelling free-surface flows,” 19th ILASS-Americas Conference, Toronto, ON, May 23-26, 2006. PDF
2005 And Before
M. Raessi, J. Mostaghimi, and M. Bussmann, “Effect of surface roughness on splat shapes in the plasma spray coating process,” 7th Asia Pacific Conference on Plasma Science and Technology and 17th Symposium on Plasma Science for Materials, Fukuoka, Japan, June 29 – July 2, 2004.
M. Malik and M. Bussmann, “Volume tracking on adaptively refined grids with curvature based refinement,” 2004 CSME Forum, London, ON, June 1-4, 2004. PDF
M. Bussmann, J. Mostaghimi, D.W. Kirk and J.W. Graydon, “A numerical study of steady flow and temperature fields within a melt spinning puddle,” International Journal of Heat and Mass Transfer 45(19), 3997-4010, 2002.
M. Bussmann, D.B. Kothe and J.M. Sicilian, “Modeling high density ratio incompressible interfacial flows,” 2002 ASME Fluids Engineering Meeting, Montreal, QC, July 14-18, 2002, FED 257(1B), 707-713. PDF
M. Pasandideh-Fard, M. Bussmann, S. Chandra and J. Mostaghimi, “Simulating droplet impact on a substrate of arbitrary shape,” Atomization and Sprays 11(4), 397-414, 2001.
M. Bussmann, S. Chandra and J. Mostaghimi, “Modeling the splash of a droplet impacting a solid surface,” Physics of Fluids 12(12), 3121-3132, 2000.
M. Bussmann, S.D. Aziz, S. Chandra and J. Mostaghimi, “Photographs and simulations of molten droplets landing on a solid surface,” Journal of Heat Transfer 122(3), 422, 2000.
M. Pasandideh-Fard, M. Bussmann, S. Chandra and J. Mostaghimi, “Droplet impact on a tube: Simulations and experiments,” 8th International Conference on Liquid Atomization & Spray Systems, Pasadena, CA, July 16-20, 2000. PDF
M. Pasandideh-Fard, M. Bussmann, S. Chandra and J. Mostaghimi, “On a 3D computational model of free surface flows including internal obstacles,” 8th Annual Conference of the CFD Society of Canada, Montreal, QC, June 11-13, 2000, 603-610.
M. Bussmann, J. Mostaghimi and S. Chandra, “On a three-dimensional volume tracking model of droplet impact,” Physics of Fluids 11(6), 1406-1417, 1999.
M. Bussmann, S. Chandra and J. Mostaghimi, “Numerical results of off-angle thermal spray particle impact,” 2nd United Thermal Spray Conference, Düsseldorf, March 17-19, 1999, 783-786. PDF
M. Bussmann, J. Mostaghimi, S. Chandra and H.N. Tran, “Numerical modelling of carryover deposition in kraft recovery boilers,” TAPPI International Engineering Conference, Miami, FL, September 13-17, 1998, 193-199. PDF
M. Bussmann, S.D. Aziz, S. Chandra and J. Mostaghimi, “Modelling the fingering of impacting droplets,” 6th Annual Conference of the CFD Society of Canada, Quebec, QC, June 7-9, 1998, IV, 43-48. PDF
M. Bussmann, S.D. Aziz, S. Chandra and J. Mostaghimi, “3D modelling of thermal spray droplet splashing,” Proceedings of the 15th International Thermal Spray Conference, Nice, France, May 25-29, 1998, 413-418.
M. Bussmann, S. Chandra and J. Mostaghimi, “Three-dimensional droplet impact,” Physics of Fluids 9(9), S7, 1997.
M. Bussmann, S. Chandra and J. Mostaghimi, “Droplet impact onto arbitrary surface geometries,” ASME FED Summer Meeting, Vancouver, BC, June 22-26, 1997, FEDSM97-3073. PDF
M. Bussmann, J. Mostaghimi and S. Chandra, “On a three-dimensional model of droplet impact,” 3rd Asia-Pacific Conference on Plasma Science and Technology, Tokyo, Japan, 1996, 95-100.
M. Renksizbulut and M. Bussmann, “Multicomponent droplet evaporation at intermediate Reynolds numbers,” International Journal of Heat and Mass Transfer 36(11), 2827-2835, 1993.
M. Renksizbulut, M. Bussmann and X. Li, “A droplet vaporization model for spray calculations,” Particle and Particle Systems Characterization 9(1), 59-65, 1992.
M. Bussmann and M. Renksizbulut, “Convective evaporation of an extremely volatile fuel droplet,” Journal of Thermophysics and Heat Transfer 4(4), 527-529, 1990.